Our factory specializes in producing corrugated regular packing and loose packing, which can be made of materials such as stainless steel, copper, aluminum, pure titanium, molybdenum titanium, etc. It has been applied in fields such as spices, pesticides, fine chemicals, and petrochemicals. Regular packing is divided into mesh, wire mesh, orifice plate, rolled orifice plate, etc.

The dried material is added from the center of the shell, and under the stirring of the constantly rotating rake teeth, the material moves back and forth in the axial direction. The surface in contact with the inner wall of the shell is constantly updated, and indirectly heated by steam. The uniform stirring of the rake teeth and the crushing of the crushing rod cause the moisture inside the material to vaporize. Under the action of the vacuum system, the internal and surface moisture of the dried material is more effectively pushed out. The vaporized moisture is discharged from the outlet of the vacuum pump through the dry dust collector, wet dust collector, and condenser.

Packing type	material	Peak Height h mm	specific surface area m²/m²	hydraulic diameter ah/mm	angle of inclination	void ratio %	f factor m/s kg/m²	Theoretical Tower Plate no/m	pressure drop mmhg/m
SW-1	stainless steel	4.5	643	5.7	45	91.6	1.4-2.2	5-8	2-3.5
SW-1		6.5	450	9	30	95.5	1.5	4-5	1.6-1.8

Geometric characteristic parameters of wire mesh corrugated packing SC=CY SB=BX

Packing type	material	Peak Height h mm	specific surface area m²/m²	hydraulic diameter ah/mm	angle of inclination	void ratio %	f factor m/s kg/m²	Theoretical Tower Plate no/m	pressure drop mmhg/m
CY	stainless steel	4.3	700	5	45	87-90	1.3-2.4	6-9	5
BX		6.3	500	7.3	30	95	2-2.4	4-5	1.5

Packing type	material	Peak Height h mm	specific surface area m²/m²	hydraulic diameter ah/mm	angle of inclination	void ratio %	f factor m/s kg/m²	Theoretical Tower Plate no/m	pressure drop mmhg/m
SM125	stainless steel	24	125	35	45	98.5	3	1-1.2	1.5
Sm²25		12	250	15.8	45	97	2.6	2-3	1.5-2
SM325		8	350	12	45	95	2	3.5-4	1.5
SM425		6.5	450	9	45	93	1.5	3-1	1.8

 

Geometric characteristic parameters of corrugated packing for rolled orifice plate

Packing type	material	Theoretical Tower Plate no/m	Peak Height h mm	void ratio %	specific surface area m²/m²	pressure drop mmhg/m	f factor m/s kg/m²
700Y	stainless steel	5-7	4.3	85	700	7	1.6
500X		3-4	6.3	90	500	2	2.1
250Y		2.5-3		97	250	2.25	2.6